The Chief slip-on bonnet specially created to slip over Indian factory fender bonnet lights.  Choose from the many color designs available. Eyes are bored out with clear acrylic inserts, unless otherwise specified in order to let light shine through.
To determine which size you need:
For the large bonnet, measure from the top of the black headdress, over the nose, to the front tip where it touches the bike. You should get measurement about 3.25”. May also be determined by printed letters around the front base.
For the small bonnet, measure from the top of the black headdress, over the nose, to the front tip where it touches the bike. You should get measurement about 2.75”. There will also be no printed lettering on the front base. *Currently be do not have fender bonnets for the newest bonnet design- see video above.*

Supplies: 
Rubbing alcohol, 100% silicone tube (included), painters tape, and paper towels.
 
Artabyss pieces are not scuplted metal, but rather made with a process called cold casting.
"Cold-Casting" is a term used to describe the process of mixing metal powder with a resin to create castings that give the appearance of solid metal. The metal cold-cast process (also known as "bonded metal") is faster and much easier to heat form compared with foundry casting of molten metal (lost wax process.) Unlike solid metal, this allows emblems to be heated up and molded to fit curved surfaces. Sculptures are then airbrushed as directed by the consumer. Metal "chrome/silver" paint, (which is actual pulverized chrome) may then be added, giving it a high shine, replicating  solid chrome. Because the surface is metal, the pieces are susceptible to patina or possibly rust. This is why all products are sealed with professional automotive topcoating.**