Slip-On Front Fender Skull Bonnet Design 7
The Skull slip-on bonnet specially created to slip over large Indian factory fender bonnet lights. The eyes have been replaced with glass inserts, allowing the light to shine through from your existing fender light. This is a slip on, not a wired light.
Please confirm that the current bonnet on your bike is for the large design. For the large bonnet, measure from the top of the black headdress, over the nose, to the front tip where it touches the bike. You should get measurement about 3.25”.
The bonnets come with one piece of 3m tape- this is to secure the piece down as you silicone it. The 3m tape will not keep the bonnet on, the silicon is what secures it.
Supplies:
Rubbing alcohol, 100% silicone tube, painters tape, and paper towels.
Artabyss pieces are not scuplted metal, but rather made with a process called cold casting.
"Cold-Casting" is a term used to describe the process of mixing metal powder with a resin to create castings that give the appearance of solid metal. The metal cold-cast process (also known as "bonded metal") is faster and much easier to heat form compared with foundry casting of molten metal (lost wax process.) Unlike solid metal, this allows emblems to be heated up and molded to fit curved surfaces. Sculptures are then airbrushed as directed by the consumer. Metal "chrome/silver" paint, (which is actual pulverized chrome) may then be added, giving it a high shine, replicating solid chrome. Because the surface is metal, the pieces are susceptible to patina or possibly rust. This is why all products are sealed with professional automotive topcoating.**